Want Clean Water?

[Taylor_01]

As some of you know, I do service and installation work on Reverse Osmosis, Water Softeners, Whole house pressure regulators, RO filter changes, some plumbing, everything involved with repair and more. I personally have 5 years of experience in the field, and 2 partners I work with combined have 15.

I've decided to start out on my own. Many members on RA know me and have personal experience with my profession. I've done installs and service for them and helped over the phone with service.


RO's:

- Service call, $45, plus parts that need replacement.

- Filter changes, $65, only needed once a year.

- 4 stage filter system, $200 with 5yr parts warranty, 1yr labor.

- 5 stage filter system, $250 with 5yr parts warranty, 1 yr labor.

- Colored Faucets, $20.

- Ice maker hook-ups, $15 with existing line, $35 for a manual run.

Typical service calls go from $50-$100 just to knock on the door. Some are even added to filter changes bringing the total anywhere from $80 to $180. My costs are a flat fee with tax included.


Water Softener's:

- Service call, $55, plus parts that need replacement.

- I have many different options available as far as valves and sizes of tanks. The size of the softener is dependent on how many people live in the home.

- Prices range from $500 to $800 for loop installs, and come with a 5yr parts, 2yr labor warranty.

- Add $200-$400, depending on distance, to installs that require a full line install. That means when there is no loop in the garage, and tapping into the main is required. Followed by trenching the pipe and running the drain. The added price is negotiable.

- Soft water hose bibb for washing cars, quads, motorcycles, filling RV's, $20.

Feel free to PM me to discuss further questions on anything posted above. I'm more than willing to help out with cost with payments on softeners and services.


Under sink Plumbing:

- Cold water angle stop replacement with riser line, $75, addtional Hot water angle stop, $60. I do suggest replacing them both at the same time. They can get very corroded and sometimes will leak with the slightest movement, in the event you ever need to turn off the water. Many people replace the Cold side while getting the RO installed. Hot side is optional, but recommended.


The only extra service call fee, unless discussed prior, is out-of-area calls. Examples: Anthem, New River, Florence, Casa Grande, Tucson etc.

Like mentioned before, if you have any questions feel free to PM me. I can also refer you to the RA members I've done business with, unless they want to chime in here. Thanks again and keep the rubber side down.

[Mr. Ted]

Let me be the first to give Taylor a shout out. He is the man. Does awesome work and has serviced my RO (as well as installing it) with very reasonable prices.

[TFQTZMAN]

We're having problem with our softener. Pm me your # & i'll call next week.
Tim

[K.T.G.]

Good luck to you Taylor. I know you've got great Work & People skills to make this happen.

[drtrider145]

Another thumbs up for Taylor my system has been flawless for many years now and T still comes over once a year and changes filters for me.

[ball bearing]

wats it cost to com to mesico, mi watr suks dowm her. i jus got bak frm jj's and i hav drty water. can u hulp me?:drunk::rock:

[eclipse]

Can we pay you with RA fuel for your services? Just kidding I will defenetly keep you on mind when it is time for a softwater system.

[Taylor_01]

Thanks for the kind words, guys.

Bob - I was talking to Ryan about installing an RO in your beach house. Would be a great idea. I'll call you.

eclipse - If the fuel could be converted into the USD, I'd be all over it!

[Reactancexl]

I would assume there would be some soldering involved to install? Are you or planning to get licensed and insured? Insurance would be a must in either case, cause if a solder joint, etc comes apart for some reason and floods the house could cause issues on who is responsible to pay. Just a thought. thx

[Taylor_01]

I would assume there would be some soldering involved to install? Are you or planning to get licensed and insured? Insurance would be a must in either case, cause if a solder joint, etc comes apart for some reason and floods the house could cause issues on who is responsible to pay. Just a thought. thx

Absolutely, and it's already in the works. In 5 years, I have not 1 record on file for damages or major repair. Granted, if a part fails, that's a seprate issue and covered under manufacturers warranty. If it's labor related, I stand behind all my work. Solder should never leak when it's sweat right.

[SPORTSMAN 4X4]

I have a problem with my water softner. It drips right where the water supply connects. It is a Sears Kenmore. It has 1 inlet and one outlet that seal with an oring. I replaced the orings and same thing. still drips. I payed plumber 40.00 to come look at it and he did the same thing I did, replace both orings and still leaks so I keep it in the bypass position and no leak. What does this sound like to you? Cracked housing?

[ElderGeek]

Could be an alignment issue. Vertically as opposed to horizontally. Is the 'header' plastic or nylon like this one?

[SPORTSMAN 4X4]

Exactly like the pic. I tried moving it around to get it perfectly straight but did not help.

[ElderGeek]

Is there any strain when it's all connected? Could still be a crack, Taylor should be able to figure it out.

[SPORTSMAN 4X4]

Is there any strain when it's all connected? Could still be a crack, Taylor should be able to figure it out.
No strain on it and I don't see any cracks. I don't want to keep paying someone to come look at it and still not fix it. You know what I mean?

[Taylor_01]

How old is your unit? Those O-rings have to be lubed like crazy to seat properly. Also, the grooves where the O-ring fits could be worn or mishaped. Those plastic bypasses can be nothing but trouble when installing. The heat from the torch can melt/warp that plastic if not careful, and only gets worse. Once the bypass is bent or warped..... time to replace with a new one.

If the copper wasnt leveled properly during installation, it can put extra wear on the plastic and bend it over time.

[DesertBlackBear]

Taylor,
what system do you install that is not RO. I am thinking of whole house filters that filter out the chemicals and taste from city water. Would that also get rid of water spots in the shower?

[Taylor_01]

Taylor,
what system do you install that is not RO. I am thinking of whole house filters that filter out the chemicals and taste from city water. Would that also get rid of water spots in the shower?

Well, RO is installed usually in your kitchen for drinking water, coffee, cooking etc. Anything installed in the garage or side of the house is typically just for filtration. RO's dont filter the same way a softener does. You can buy whole house RO but it is very expensive and not worth it, IMO.

You can have a 20 inch big blue charcoal filter installed. It will reduce water spots and taste, but not 100% eliminate them. I've even seen some folks install dual 20 inch canisters, then put a sediment filter in first, then a charcoal.

I'll use an offroad performance analogy for getting rid of water spots and taste in your home, to getting more power and performance out of your quad. A water softener would be like getting a full system exhaust, intake, cam and Flexx bars. A big blue system would be like getting a high flow drop-in filter, better tires and Tag handlebars.

[SPORTSMAN 4X4]

How old is your unit? Those O-rings have to be lubed like crazy to seat properly. Also, the grooves where the O-ring fits could be worn or mishaped. Those plastic bypasses can be nothing but trouble when installing. The heat from the torch can melt/warp that plastic if not careful, and only gets worse. Once the bypass is bent or warped..... time to replace with a new one.

If the copper wasnt leveled properly during installation, it can put extra wear on the plastic and bend it over time.
I beleive it was installed when the house was built in 1995. I lubed the orings up real good when I was attemting to fix it and the plumber I hired did the same thing. I even tried gasket sealer but no luck. If this thing is 14 years old, is it worth fixing?

[Taylor_01]

How old is your unit? Those O-rings have to be lubed like crazy to seat properly. Also, the grooves where the O-ring fits could be worn or mishaped. Those plastic bypasses can be nothing but trouble when installing. The heat from the torch can melt/warp that plastic if not careful, and only gets worse. Once the bypass is bent or warped..... time to replace with a new one.

If the copper wasnt leveled properly during installation, it can put extra wear on the plastic and bend it over time.
I beleive it was installed when the house was built in 1995. I lubed the orings up real good when I was attemting to fix it and the plumber I hired did the same thing. I even tried gasket sealer but no luck. If this thing is 14 years old, is it worth fixing?

Thats up there in age for a softener. They all have a shelf life and that leak could have been much worse. My suggestion is to replace.

[ElderGeek]

I have a Kenmore softener too. Installed spring of '04. Does the membrain go bad over time? How long?

On another topic, how much water is used to produce 1 gal of RO water? When I was installing RO systems on produce cases in the grocery stores, (the ones that mist all the veggies in Frys stores) over 15 years ago, it was 3 gal down the drain for 1 gal of RO.

Have they improved this ratio since then?

[Taylor_01]

I have a Kenmore softener too. Installed spring of '04. Does the membrain go bad over time? How long?

On another topic, how much water is used to produce 1 gal of RO water? When I was installing RO systems on produce cases in the grocery stores, (the ones that mist all the veggies in Frys stores) over 15 years ago, it was 3 gal down the drain for 1 gal of RO.

Have they improved this ratio since then?

Softeners dont have membranes, like RO's do. The tanks are filled with resin beads. Resin looks like gold beach sand, but some types are black. I usually suggest a resin rebed every 5 to 7 years. Over time, the resin can gel and/or lose its ability to perform the ion exchange. Not all of them need it at that time, just rule of thumb for preventative maintenance.

Waste ratios haven't really improved. They're still around 3:1 and 2:1. However, there is a system out there sold by Watts that takes the waste water, and forces it back into the hot water supply. It creates a loop of water by use of a booster pump, and only allows the waste water to flow one direction. It wastes no water at all.

[ElderGeek]

My bad, I meant resin, was thinking membrain.....

I have also heard the RO systems are acidic causing corrosion problems on piping and fixtures. What's the skinny on that?

[Taylor_01]

I have also heard the RO systems are acidic causing corrosion problems on piping and fixtures. What's the skinny on that?

RO's have their own tubing and faucet. In no way do they affect the rest of your plumbing or fixtures. I put that in the same area as those new "water softeners" with magnets on the main. I guess its some wire you wrap around the main and it blasts out the minerals. What a scam. I have tested those things at homes before, waste of alot of money.

I've seen RO's that were 15 and 20 years old that hadn't caused any damage to lines or fixtures. Some even connected to a copper ice line to the fridge. Normally, you dont connect an RO line to copper but I've seen them work without issue. However, I do not suggest letting an RO get over 10-12 years old. That plastic is under constant water pressure and over time, it will weaken. Not everything lasts forever and sooner or later you have to replace it. I've seen 3 inches of water in a house before because an RO let go. Preventative maintenance would have saved it.

[duneflyer]

I've got one under the sink that needs some help, but... I'm in Yuma. So do I gotta wait till next dune season? LOL

[Shane1]

Lots of good info here!
I just installed a WHIR RO system a couple months ago. Makes a huge difference and well worth the money.

Good luck man
PM sent

[Vin Man]

I'll also recommend Taylor - great work and professionalism. Taylor - are you also going to offer hot water recirc pumps? They are all the rage now!

[Taylor_01]

I'll also recommend Taylor - great work and professionalism. Taylor - are you also going to offer hot water recirc pumps? They are all the rage now!

Thanks, Vinny.

Yes I am installing the recirc pumps. They are awesome. I have an order for some. We'll be selling them for $350. Flex lines on the heater will be extra if old and corroded. Flex lines will be an extra $70 for both, installed.

[Taylor_01]

I've got one under the sink that needs some help, but... I'm in Yuma. So do I gotta wait till next dune season? LOL

Depends. How bad of shape is it? Im sure we can work something out.

[Dentless]

I am pretty sure that I am due for my filters changed. I don't remember exactly when you put my RO in, but I am sure it was over a year ago. Just a little warning to anyone thinking of using Taylor. If he makes you his last stop on Friday, you are required to give him cold beer during the install. At least that is what he made me do. Excellent guy. Excellent products. Excellent prices...............

[Taylor_01]

TTT, Summer is here. $10 off your first service.

[ElderGeek]

Question for ya!

What does one do to remove the "salt bridge" at the bottom of the softener tank?

In service for 5 years, the bridge is about an 1 to 1.5 thick right on the bottom. It was last cleaned about 14 months ago. It is very, very hard. I tried chipping it out but I would really need to get after it to do any good & I don't want to crack the bottom of the plastic tank itself. The best method I have found is to add hot water (approx. 3 gal) from the h20 heater. (which sits right next to it) Then run it through a recharge. Do this a few times to clear enough of the 'bridge' to break it up and take it out.

Is there another way?

[Taylor_01]

Question for ya!

What does one do to remove the "salt bridge" at the bottom of the softener tank?

In service for 5 years, the bridge is about an 1 to 1.5 thick right on the bottom. It was last cleaned about 14 months ago. It is very, very hard. I tried chipping it out but I would really need to get after it to do any good & I don't want to crack the bottom of the plastic tank itself. The best method I have found is to add hot water (approx. 3 gal) from the h20 heater. (which sits right next to it) Then run it through a recharge. Do this a few times to clear enough of the 'bridge' to break it up and take it out.

Is there another way?

Ahh these are fun. Most will dissolve with hot, not warm, water and some chopping. Hot will cause the salt molecules to expand further. Being that it's so far down there, an 1.5in at the most off the bottom, it will take time and some effort, but will come loose.

You wont damage the salt tank unless you are harpooning the bottom. Use HOT water. Putting it through a recharge won't affect it.

Also, how full are you filling the tank and what kind of salt do you use?

[ElderGeek]

Potassium tabs, Kenmore softener.

The level is what ever the float is set for from the factory. Never had to set it during install. Should I? Looks like about 3 - 3.5" of water at the bottom.

After I add my three gals of hot water it rises to about 6" deep. After recharge, it goes back to the usual 3 - 3.5".

I have found if I set the spray nozzle to pinpoint stream I can almost cut it into chunks.

[Taylor_01]

My second question was if you were using potassium. Salt breaks up easily, potassium turns into cement. Theres no real trick for potassium except elbow grease and patience. I always suggest people to fill the brine tank no more than half way up the tank.

[ElderGeek]

I have found if I stay on top of it, (once a year cleaning) things run as they should.

Thanks Taylor...

[Taylor_01]

You got it. Preventative maintenance is key.

[Webopper]

Congrats Taylor on busting out on your own. I'm sure you'll do great.

I got to say, I had Taylor all the way out here in the west valley, and he really did a great job and hooked me up sweet.

I'll have to check the records, but I'm probably getting close to needing my service also. I'll be giving you a holler when I do bud...

[Taylor_01]

Congrats Taylor on busting out on your own. I'm sure you'll do great.

I got to say, I had Taylor all the way out here in the west valley, and he really did a great job and hooked me up sweet.

I'll have to check the records, but I'm probably getting close to needing my service also. I'll be giving you a holler when I do bud...

Thanks, Brian. Just give me a call and I'll come out.

[Taylor_01]

Anyone due for a filter change? $10 off your first service this month.

[Hiker]

T, set up a nice page on Craigslist in the Services section under Household. Dress it up nice with photo and services/area covered.

I have one and it's working out pretty good.

Also, get on Kudzu. If you need a couple comps, let me know...

[Mr. Ted]

FYI- I had Taylor install a recirculating pump in my house and it works fantastic. The master shower is at the other end of the house from the water heater and it literally used to take twenty minutes to get the water hot. Now it is truly instantaneous. It not only saves water, but I was able to turn down the temperature on the water heater, so I am looking forward to the saving not only on water, but hopefully a little on electric as well (or at least it will be a wash with the adding of the pump). Great job by Taylor, as always, very reasonable and he had it done in about 20 minutes. Thanks.

[Hubcap]

Just changed the 3 filters on my under sink RO. There are a couple filters on the top of the unit that mount horizontally that I didnt change. The last few weeks I noticed the thing is running more than usual. Whats up with that?

[Taylor_01]

Just changed the 3 filters on my under sink RO. There are a couple filters on the top of the unit that mount horizontally that I didnt change. The last few weeks I noticed the thing is running more than usual. Whats up with that?

The larger filter housing is the membrane. It's where 99% of the filtering process happens. They typically last 2-5yrs, but I've seen some go more. Membranes usually only get changed when the water starts to taste really bad. A TDS meter can assist with that detection. The thinner filter is a post filter, its in charge of taste and odor removal and should be changed annually with the other 3. The excess draining could be a number of issues. Low tank pressure, WCV valve going out, flow restrictor...etc. Hard to say without looking at it.

[Norminaz]

FYI- I had Taylor install a recirculating pump in my house and it works fantastic. The master shower is at the other end of the house from the water heater and it literally used to take twenty minutes to get the water hot. Now it is truly instantaneous. It not only saves water, but I was able to turn down the temperature on the water heater, so I am looking forward to the saving not only on water, but hopefully a little on electric as well (or at least it will be a wash with the adding of the pump). Great job by Taylor, as always, very reasonable and he had it done in about 20 minutes. Thanks.



Ted... There was a recirc pump on that house already..... Did It go out???

[Mr. Ted]

FYI- I had Taylor install a recirculating pump in my house and it works fantastic. The master shower is at the other end of the house from the water heater and it literally used to take twenty minutes to get the water hot. Now it is truly instantaneous. It not only saves water, but I was able to turn down the temperature on the water heater, so I am looking forward to the saving not only on water, but hopefully a little on electric as well (or at least it will be a wash with the adding of the pump). Great job by Taylor, as always, very reasonable and he had it done in about 20 minutes. Thanks.



Ted... There was a recirc pump on that house already..... Did It go out???
Yeah it never worked, as far as I know. I saw it there, obviously, but I don't think they can be serviced or whatever, so I fiqured I'd have Taylor replace it. No worries...

[Taylor_01]

Norm, the version you had installed was a lower end model that was installed on the cold side. Those have a short shelf life and are hard piped in, making for a complicated removal. The one on there now is what I have installed at my own house, and I trust.

[Hubcap]

Just changed the 3 filters on my under sink RO. There are a couple filters on the top of the unit that mount horizontally that I didnt change. The last few weeks I noticed the thing is running more than usual. Whats up with that?

The larger filter housing is the membrane. It's where 99% of the filtering process happens. They typically last 2-5yrs, but I've seen some go more. Membranes usually only get changed when the water starts to taste really bad. A TDS meter can assist with that detection. The thinner filter is a post filter, its in charge of taste and odor removal and should be changed annually with the other 3. The excess draining could be a number of issues. Low tank pressure, WCV valve going out, flow restrictor...etc. Hard to say without looking at it.
I installed the thing about 5 or 6 years ago, I've never changed the membrane. The water is nice and clear and tastes fine, but this excessive draining is about to drive me loony. The pressure seems to be fine, but I'm not sure what the WCV valve is. What does WCV stand for. I'm a plumber but I dont know allot about these RO units. Maybe I should just give you a call.

[Marlin]

Hey... I just saw this post!

Taylor, my annual RO filter change will be the beginning of August... Please schedule me in! :) (Obviously, I will understand that it would make sense to have a few lined up out here in the "northwest valley"... :) So whatever works for you Mr. T).

[Taylor_01]

Hey... I just saw this post!

Taylor, my annual RO filter change will be the beginning of August... Please schedule me in! :) (Obviously, I will understand that it would make sense to have a few lined up out here in the "northwest valley"... :) So whatever works for you Mr. T).

I'll gladly make the journey, Marlin. I'll just set up camp in Peoria, feed the horse, then head out at dawn lol. Just let me know buddy and I'll be there. Maybe hit up Speedworld afterwards??

[code918]

Damn Taylor! And to think all this time that you were only an expert in beer drinking and busting Norm's balls..

I just read all the posts in this thread and it sounds like you DO know what you are talking about! I'm impressed!

To the top... free bump!

[Marlin]

Taylor, I have heard good reports regarding your work, and would like to see if you can schedule me in sometime during the week of August 10.

I have a water softner and r.o. that will be 5 years old now, so I assume the "5 year maintenance" plan sounds good, as well as replacing the r.o. filters, etc.

Sound good?

[Taylor_01]

Taylor, I have heard good reports regarding your work, and would like to see if you can schedule me in sometime during the week of August 10.

I have a water softner and r.o. that will be 5 years old now, so I assume the "5 year maintenance" plan sounds good, as well as replacing the r.o. filters, etc.

Sound good?

For sure, Marlin. I'll be there.

[ball bearing]

Taylor, I live in a 40 year old house with copper pipes in northwest Phoenix. I drink good tasting water right out of the faucett. Give me some reasons why I should have you filter my water and maybe you can talk me and/or someone else into spending money with you. I had a soft water thing once connected to the whole house, but got tired of buying salt. I know absolutely nothing in this subject but would trust your opinion more than a sellsperson at HD...

[Taylor_01]

Taylor, I live in a 40 year old house with copper pipes in northwest Phoenix. I drink good tasting water right out of the faucett. Give me some reasons why I should have you filter my water and maybe you can talk me and/or someone else into spending money with you. I had a soft water thing once connected to the whole house, but got tired of buying salt. I know absolutely nothing in this subject but would trust your opinion more than a sellsperson at HD...

Honestly Bob, if you're happy with your water the way it currently is, I say leave it. For many people RO water is a luxury and have to have it, while others dont mind city water. Its all preference. So I'd rather shoot you straight rather than talk you or anyone into buying something they might not need, if they're already happy.

Who knows, you might try RO and like it more than the city. Then we'll talk numbers. How bout I bring you some for Dunerfest? I'll fill some jugs from my own system and keep them cold. However you want to work it Im here to help and answer any questions.

Softeners are a whole different world. If you didn't like buying salt back then, you never will lol.

[ball bearing]

Taylor, I live in a 40 year old house with copper pipes in northwest Phoenix. I drink good tasting water right out of the faucett. Give me some reasons why I should have you filter my water and maybe you can talk me and/or someone else into spending money with you. I had a soft water thing once connected to the whole house, but got tired of buying salt. I know absolutely nothing in this subject but would trust your opinion more than a sellsperson at HD...

Honestly Bob, if you're happy with your water the way it currently is, I say leave it. For many people RO water is a luxury and have to have it, while others dont mind city water. Its all preference. So I'd rather shoot you straight rather than talk you or anyone into buying something they might not need, if they're already happy.

Who knows, you might try RO and like it more than the city. Then we'll talk numbers. How bout I bring you some for Dunerfest? I'll fill some jugs from my own system and keep them cold. However you want to work it Im here to help and answer any questions.

Softeners are a whole different world. If you didn't like buying salt back then, you never will lol.
does RO taste cleaner? does it take things out of the water? I've seen seperate taps at sinks, so I assume it's RO. I didn't know about plush riding utv's until someone made me ride theirs, now I have 3. I won't ride my friends goldwing, cuz I don't want to know how smooth t is, I'll stick to my harley. I'm willing to try the RO, just want to know more about it

[Taylor_01]

Sounds good, I'll give you a call today.

[Hubcap]

Taylor,
I need an auto shutoff valve for my under sink R.O. Do you have one you can sell me, or know where I can get one?

Thanks

[Taylor_01]

Taylor,
I need an auto shutoff valve for my under sink R.O. Do you have one you can sell me, or know where I can get one?

Thanks

PM sent.

[Marlin]

Taylor... Thanks for coming out last week and taking care of the system!!! :)

Great job by the way! :) If you need references, don't hesitate using my name.

[X_Da_C]

Can you install a dr pepper fountain in my room?

[Mr. Ted]

Props yet again to Mr. Taylor for fixing my water softener. Great service and price as always. Thanks much T!

[Taylor_01]

Marlin and Ted, you're both certainly welcome.

[ball bearing]

Taylor, I'll be in RP this weekend. I'll be home on the 5th and gone the next 3 weekends. I think I OD'd on your mom's spinach dip....but it was good.

[Taylor_01]

$50 filter changes through the month of October. Quite a few views on the ad so I know people are looking. I'm always willing to negotiate prices, even though Im significantly lower than most large companies, and trades are always an option.

[Hubcap]

Hey Taylor, I think I might need that brine filter after all, water is still running a little to much. What kind a price am I looking at.

[Taylor_01]

Hey Taylor, I think I might need that brine filter after all, water is still running a little to much. What kind a price am I looking at.

New membranes typically run $59.95 plus tax. I can get you one for $40 and throw in a new flow restrictor for free.

[ball bearing]

hey Taylor, I'm a little late on thanking you for the RO system. Nothing leaking yet, but I did have to get a new fridge when I got back from Alaska. One of the friggen terminals burned off the compressor and I didn't want to change it out. That was way bad timing:(
I gave your name to some friends:)
How is your mom's a/c working?

[Taylor_01]

hey Taylor, I'm a little late on thanking you for the RO system. Nothing leaking yet, but I did have to get a new fridge when I got back from Alaska. One of the friggen terminals burned off the compressor and I didn't want to change it out. That was way bad timing:(
I gave your name to some friends:)
How is your mom's a/c working?

No prob, Bob. Thanks for the referrals. My mom's a/c is great, she can't thank you enough. Cactus Mechanical gets 2 thumbs up.

[Hubcap]

Hey Taylor, I think I might need that brine filter after all, water is still running a little to much. What kind a price am I looking at.

New membranes typically run $59.95 plus tax. I can get you one for $40 and throw in a new flow restrictor for free.

Are they all pretty much the same? Or do I need to give you a model number?

It says on it... Ultima Water System Model VII. Serial #059328

[Taylor_01]

They all do the same thing, but, some filter faster than others. Some are 24, 50, 75 and 100 gallons per day. And not all membranes last as long. You get what you pay for.

[Hubcap]

I dont think I use a lot of water per day, so the 24 or 50 would probably be sufficient. As far as physical size, are they the same? Mine looks like it has a threaded cap on one end that you take off, take the old membrane out slide the new one in, then put the cap back on. Does that sound right?

[Taylor_01]

You got it. Get the 24, it's a residential standard.

[Hubcap]

PM sent

[i8sand]

Another satisfied customer !
Taylor was Very professional and knowledgable, he showed up when he said he would and charged me exactly what he quoted. He Definitely earned another customer and I will gladly refer him to anyone I know needing installation or service.
Thanks Taylor

[Taylor_01]

Tired of waiting 5 minutes or longer for the hot water to arrive at your sink? With an Instant Hot Water Recirc Pump, those days are gone. Hot hot right away at ANY faucet in the house. I just got some in and will be selling them for $300 installed. The ones I use are high grade and have been installed in a few RA members' homes already, with great results.

Save money on your water bill each month and help conserve a precious resource.

[azwheelin]

Do those h/w recirculators work well in 2 story homes?

[Taylor_01]

Do those h/w recirculators work well in 2 story homes?

Without a doubt. I've installed them in 5,000sqft multi-level homes. They work great.

[ball bearing]

how do you get water to recirculate without a return line?

[luke]

Uses a pump to pressurize hot line and a bypass valve to let hot go into cold at sink.

The best system is to have a dedicated return line, but you won't get that for $300.00.

[Taylor_01]

Luke got it. The bypass piece is installed onto the angle stops at the furthest faucet away from the water heater. It creates somewhat of a loop of hot water, so when a fixture is opened, the hot water is rushed directly to it via the pump. You can set it to run for certain hours at a time so it doesnt constantly run.

This is a cost effective way to provide hot water more efficiently throughout your house, rather than do heavy construction with a dedicated return line.

I use Grundfos only. Read the last paragraph on how it works for more info...
http://www.grundfos.us/Web/HomeUs.nsf/Webopslag/PAVA-53MKRN

In Arizona, the average household consumes 126,632 gallons of water per year at an annual cost of $236.49*. With new housing starts estimated to reach 54,903 per year by 2000, annual water consumption by new houses alone will total nearly 7 billion gallons at a cost of approximately $13 million per year. Were all new houses built in Arizona to include a Grundfos hot water recirculation system (with an average 200 foot supply line), water saved would total 16,534** gallons per year per household. The corresponding annual water bill would be reduced by approximately $32 and the energy bill by approximately $44. In total, hot water recirculation could save the state of Arizona nearly 950 million gallons of water per year and save new home owners nearly $1.8 million in annual water charges.

[luke]

The Grundfos pumps are bullet proof, the impellers are not directly connected to the motor but are magnetically driven and are totally isolated from the electric motor.

We used them when I was doing solar water heating back in the 80s
Also did water recirculation as well.

[ball bearing]

The Grundfos pumps are bullet proof, the impellers are not directly connected to the motor but are magnetically driven and are totally isolated from the electric motor.

We used them when I was doing solar water heating back in the 80s
Also did water recirculation as well.
so was i...license is still good.:cool:
back when i worked on chillers and boilers here in town, there was always a dedicated return line with a pump going back to the source. most of the pumps were Bell & Gossett.

what keeps the hot water from being forced into the toilet when it is flushed?

[Taylor_01]

The Grundfos pumps are bullet proof, the impellers are not directly connected to the motor but are magnetically driven and are totally isolated from the electric motor.

We used them when I was doing solar water heating back in the 80s
Also did water recirculation as well.
so was i...license is still good.:cool:
back when i worked on chillers and boilers here in town, there was always a dedicated return line with a pump going back to the source. most of the pumps were Bell & Gossett.

what keeps the hot water from being forced into the toilet when it is flushed?

I've seen it happen in few homes. It's designed to only pump when the hot side tap is opened, not the cold; so unless your toilet is hooked up to hot water, it shouldnt be an issue. Sometimes a little warm water will come out for a second or two when the cold is opened, but thats it. It's nothing harmful.

[Mr. Ted]

X2 On what Taylor said. He installed one for me and it works great. Well worth the $300, with the water you save waiting for it to heat up.

[ball bearing]

The Grundfos pumps are bullet proof, the impellers are not directly connected to the motor but are magnetically driven and are totally isolated from the electric motor.

We used them when I was doing solar water heating back in the 80s
Also did water recirculation as well.
so was i...license is still good.:cool:
back when i worked on chillers and boilers here in town, there was always a dedicated return line with a pump going back to the source. most of the pumps were Bell & Gossett.

what keeps the hot water from being forced into the toilet when it is flushed?

I've seen it happen in few homes. It's designed to only pump when the hot side tap is opened, not the cold; so unless your toilet is hooked up to hot water, it shouldnt be an issue. Sometimes a little warm water will come out for a second or two when the cold is opened, but thats it. It's nothing harmful.
thanks Taylor. i'm overthinking this:blush:

[Taylor_01]

I may be looking for a RO system that will produce 8000 gallons a day. Is that something you can quote if it comes to pass?

That's some serious commercial grade stuff there. The most I can provide is 100 gallons per day. 8000gpd would be a membrane the size of myself.

[Taylor_01]

On April 4th 2010, I will be leaving for Iraq for a minimum of 1 year on a civilian contract with the military. All calls/questions are being forwarded to my business partner at 480-510-7747. He is just as capable as me and can help with any questions/requests you may have. Thank you!

[JOHNNY BAJA]

I may be looking for a RO system that will produce 8000 gallons a day. Is that something you can quote if it comes to pass?

On April 4th 2010, I will be leaving for Iraq for a minimum of 1 year on a civilian contract with the military. All calls/questions are being forwarded to my business partner at 480-510-7747. He is just as capable as me and can help with any questions/requests you may have. Thank you!

Hey Taylor it's been many, many moons since I've been on RA but thought I would offer some help to you and your partners. You might remember that I am a Regional Account Manager for Watts. We have RO's from your small residential 35 gpd to 150,000 gpd Commerical systems, Softeners, Wholehouse Filters, Hot Water Recirulation Pumps etc. etc.... We are an OEM and do not do any service work but if your partners are looking for another resource for your water filtration needs give me a call. Shoot me a PM and give you my contact numbers.

-Johnny

[Taylor_01]

I may be looking for a RO system that will produce 8000 gallons a day. Is that something you can quote if it comes to pass?

On April 4th 2010, I will be leaving for Iraq for a minimum of 1 year on a civilian contract with the military. All calls/questions are being forwarded to my business partner at 480-510-7747. He is just as capable as me and can help with any questions/requests you may have. Thank you!

Hey Taylor it's been many, many moons since I've been on RA but thought I would offer some help to you and your partners. You might remember that I am a Regional Account Manager for Watts. We have RO's from your small residential 35 gpd to 150,000 gpd Commerical systems, Softeners, Wholehouse Filters, Hot Water Recirulation Pumps etc. etc.... We are an OEM and do not do any service work but if your partners are looking for another resource for your water filtration needs give me a call. Shoot me a PM and give you my contact numbers.

-Johnny

PM sent. Thank you!

[Taylor_01]

Back from Iraq and back in business. Any water system needs, repairs, new installs etc... send me a PM and I'll be glad to help with the best price guranteed.

[rocmoc]

Even tho we have not always seen eye to eye.

Welcome back and good you have return safely!

rocmoc n AZ/Baja

[Taylor_01]

Even tho we have not always seen eye to eye.

Welcome back and good you have return safely!

rocmoc n AZ/Baja

That's one great thing about the USA. We have the right to free speech. Which is not a luxury over seas as witnessed first hand.

Thanks for the welcome and it's great to be home!

[Taylor_01]

All RO filter changes and routine services now $60. These annual services anywhere else are over $90.