View Full Version : New Toy
Toybreaker
03/13/05, 11:14 PM
well i just expanded my stable. My friend got tired of two storkes and replaced his banshee with a YFZ450. so i just swooped in and bought a 2000 banshee with ported cylinders(got stock ones on the bench) v-force reeds 34mm boswell engineering carbs fmf pipes, +2 +1 a-arms, PEP shocks and a dyna ignition box. all for 3k.
Once i get done tinkering and put it all back together i will post some pics.
Arizona Griz
03/14/05, 5:27 AM
Aren't you a lucky dog. :D
http://www.ridingarizona.com/forum/uploaded/Hammer/200531415013_worthlessthread.jpg
Toybreaker
03/15/05, 8:37 AM
http://www.ridingarizona.com/forum/uploaded/87lt250r/200531615018_Shee 1.JPG
Added the seat and plastic to make it look less naked
http://www.ridingarizona.com/forum/uploaded/87lt250r/200531615053_shee 2.JPG
This is a good pic of the rezzie shock and roll design arms.
http://www.ridingarizona.com/forum/uploaded/87lt250r/200531615120_shee 3.JPG
Front view of the suspension.
http://www.ridingarizona.com/forum/uploaded/87lt250r/200531615151_shee 4.JPG
Close up motor view
http://www.ridingarizona.com/forum/uploaded/87lt250r/200531615220_shee 7.JPG
Spare set of stock cylinders and Wiseco pistons
http://www.ridingarizona.com/forum/uploaded/87lt250r/200531615238_shee 8.JPG
The Boswell Engineering 34mm carbs.
Arizona Griz
03/15/05, 6:56 PM
A little elbow grease and she will be good as new. :D
Toybreaker
03/15/05, 7:49 PM
quote:Originally posted by Arizona Griz
A little elbow grease and she will be good as new. :D
Just assembly and tuning
[8D]
When i get her assembled i will post finished pics.